sand40/200
Performing and advantageous.
The SAND 40/200 corrugated sheet is distinguished by its load-bearing capacity, particularly suitable in situations where a large distance between supports is required.
With 40 mm high frets, it also guarantees a high water flow rate and thanks to its useful width of 1000 mm it is an advantageous profile during the laying phase.
Its main features are:
- Practicity: the slab is provided with a SANDsupport foot to facilitate assembly and avoid crushing the overlapping fret during installation;
- Safety: Thanks to the SANDdry system, the drainage gutter, studied to reduce the inconveniences linked to possible water infiltration. In case of potential rising of the water for capillarity, it guarantees that the water is brought in the eaves without infiltration, even in case of low slopes.
The possible bending processes are: fixed radius bending, variable radius bending.
The following applications are available on the inside: SANDnodrip non-woven fabric with anti-condensation function, or SANDcontrol non-woven fabric with anti-noise and anti-condensation function.
-
Galvanized steel
-
Stainless steel
-
Aluzinc
-
Aluminium
-
Copper
-
Magnelis
materials
-
WHITE GREY
-
DARK BROWN
-
SIENA RED
materials
-
RAL 5010
-
RAL 6005
-
RAL 6021
-
RAL 7016
-
RAL 7035
-
RAL 7037
-
RAL 8004
-
RAL 9006
-
RAL 9010
-
RAL 1013
-
RAL 1015
-
RAL 3000
-
RAL 7012
-
RAL 9005
-
RAL 9007
materials
-
RED COPPER
-
GREY TITANIUM
-
Alu Corten
-
Brown Copper
-
GREEN COPPER
materials
-
STONE BROWN
-
STONE GRAFITE
-
STONE GREY
-
STONE RED
SANDnodrip - Anti-condensation cloth
SANDnodrip is a special non-woven fabric cloth chemically bonding specific elements that create a highly porous surface with excellent moisture absorption properties.
These characteristics prevent the roof from dripping, thanks to polyester fibres and microbeads in the felt that absorb and collect the forming condensation.
SANDnodrip corrugated metal sheets are characterised by a fire resistance class A2-s1, d0.
TECHNICAL INFORMATION about SANDnodrip:
- Material = TNT 100% polyester fibre
- Nominal thickness = < 1 mm
- Colour = grey
- Fire resistance class = A2 - s1, d0
The TESTS performed on the products are:
SANDcontrol - Anti-noise and anti-condensation cloth
SANDcontrol is a special non-woven cloth with increased density, which makes it possible to significantly reduce the noise caused by outdoor weathering.
In addition, it is specially designed to offer excellent performance in absorbing any condensation that may form.
The reduced thickness allows you to carry out interventions, even in case of recovery or renovation, without raising the roof package.
The corrugated sheets with SANDcontrol application are characterised by fire resistance class C-s1, d0.
TECHNICAL INFORMATION of SANDcontrol:
- Material: TNT 100% polyester fiber
- Nominal thickness = 2-3mm
- Nominal thickness= 200 g/m2
- Color = Grey
- Fire resistance class = C - s1, d0
The Tests performed on the products are:
learn more
For variable bendings
Bending takes place by means of a series of transversal impressions to the trapezoidal sheet (notches) that produce a series of bends with constant/variable pitch.
The notches are designed and executed to allow a correct absorption of the material stresses due to deformation, without loss of rigidity of the trapezoidal element...
learn more