sandA55 P750
Structural corrugated sheet
SAND A55 P750 has a symmetrical geometry, characterised by the strong and marked appearance of frets, which makes it particularly suitable for use in facade cladding of commercial and industrial buildings. It is mainly used as a roofing slab, especially where a high load-bearing capacity is required. Compared to the SAND A55 P600, it has a greater useful width of 750 mm.
SAND A55 P750 can be ordered in the following versions: Positive (use as a dry floor), Negative (use in roofing) and CLS (for composite floor).
The possible bending operations are: fixed radius bending, variable radius bending.
The following applications are available on the internal side: SANDnodrip non-woven fabric with anti-condensation function, or SANDcontrol non-woven fabric with anti-noise and anti-condensation function.
-
Galvanized steel
-
Aluzinc
-
Magnelis
materials
-
WHITE GREY
-
DARK BROWN
-
SIENA RED
materials
-
RAL 5010
-
RAL 6005
-
RAL 6021
-
RAL 7016
-
RAL 7035
-
RAL 7037
-
RAL 8004
-
RAL 9006
-
RAL 9010
-
RAL 1013
-
RAL 1015
-
RAL 3000
-
RAL 7012
-
RAL 9005
-
RAL 9007
SANDnodrip - Anti-condensation cloth
SANDnodrip is a special non-woven fabric cloth chemically bonding specific elements that create a highly porous surface with excellent moisture absorption properties.
These characteristics prevent the roof from dripping, thanks to polyester fibres and microbeads in the felt that absorb and collect the forming condensation.
SANDnodrip corrugated metal sheets are characterised by a fire resistance class A2-s1, d0.
TECHNICAL INFORMATION about SANDnodrip:
- Material = TNT 100% polyester fibre
- Nominal thickness = < 1 mm
- Colour = grey
- Fire resistance class = A2 - s1, d0
The TESTS performed on the products are:
SANDcontrol - Anti-noise and anti-condensation cloth
SANDcontrol is a special non-woven cloth with increased density, which makes it possible to significantly reduce the noise caused by outdoor weathering.
In addition, it is specially designed to offer excellent performance in absorbing any condensation that may form.
The reduced thickness allows you to carry out interventions, even in case of recovery or renovation, without raising the roof package.
The corrugated sheets with SANDcontrol application are characterised by fire resistance class C-s1, d0.
TECHNICAL INFORMATION of SANDcontrol:
- Material: TNT 100% polyester fiber
- Nominal thickness = 2-3mm
- Nominal thickness= 200 g/m2
- Color = Grey
- Fire resistance class = C - s1, d0
The Tests performed on the products are:
learn more
For variable bendings
Bending takes place by means of a series of transversal impressions to the trapezoidal sheet (notches) that produce a series of bends with constant/variable pitch.
The notches are designed and executed to allow a correct absorption of the material stresses due to deformation, without loss of rigidity of the trapezoidal element...
learn more